产品展厅
产品展厅
Description: SPB681 is a low density polyethylene produced under high pressure technology. Films obtained with this product show excellent 'draw down', good sealability, and low gel content. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866.
Applications: LLDPE and HDPE blends.
Process: Blown and Cast Film Extrusion. Injection molding.
| 补充信息 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 生物质含量 | > 95 | % | ASTM D6866 |
| Blown Film Properties: Obtained in 75mm extruder, blow up ratio 2:1, die gap 1.0mm and 38μm thickness.Recommended processing conditions:Blown Film ExtrusionEquipment:Screw- relation L/D..........16 to 30:1Compression Ratio.........3 to 4:1Screw Package (Mesh)...40/60/40Temperature Profile:1st zone..................................110°CFrom the screw to the die.........140°CDie...........................................150°CBlow up ratio...................from 2 to 3:1Frostline Height...............at most equivalent to the bubble diameterCast Film ExtrusionEquipment type:Screw - L/D relation..........................at least 20:1Screw...................................................from 180 to 250°CDie.......................................................from 250 to 290°CChill Roll...................40°CInjection MoldingTemperature profile.........................180 to 220°CMold temperature............................5 to 25°C |
