产品展厅
产品展厅
品级：耐冲击共聚合物,PP,射出级
规格：K8005
特性：高耐冲击
用途：油漆桶
TAIRIPRO PP resin consolidated property data sheet
| 項目 | 單位 | 試驗方法 | 試驗條件 | K8005 | |
| Property | Unit | Test Method | Test Condition | ||
| 熔融指數 | g/10 min | ASTM | 230℃×2.16Kg | 5 | |
| Melt | D-1238 | ||||
| Flow Index | - | ||||
| 降伏點抗張強度 | kg/cm2 | ASTM | 23℃ | 260 | |
| Tensile Strength | D-638 | ||||
| at Yield | - | ||||
| 斷裂點延伸率 | % | ASTM | 23℃ | ＞200 | |
| Tensile Elongation | D-638 | ||||
| at Break | - | ||||
| 彎曲模數 | kg/cm2 | ASTM | 23℃ | 11500 | |
| Flexural | D-790A | ||||
| Modulus | - | ||||
| 硬度 | R-Scale | ASTM | 23℃ | 85 | |
| Hardness | D-785 | ||||
| Izod衝擊強度 | kg-cm/cm | ASTM | 23℃ | 23℃ | N.B. |
| Izod | D-256 | 1/8'' 厚 | |||
| Impact Strength | - | - | -20℃ | 9 | |
| 熱變形溫度 | ℃ | ASTM | Unannealed | 115 | |
| Heat Deflection | D-648 at | 1/4'' 厚 | |||
| Temperature | 4.6kg/cm2 | - | |||
| 收縮率 | % | FCFC | 23℃ | 1.4~1.8 | |
| Molding | Method | ||||
| Shrinkage | - | ||||
| 比重 | - | ASTM | 23℃/23℃ | 0.9 | |
| Specific Gravity | D-792 | ||||
| FDA Compliance | 21 CFR | - | Yes | ||
